Wago 753-1630 WAGO-I/O-SYSTEM 750 Specialty Modules
SMI-Master AC 230V-Module, operates up to 16 SMI drives, Input voltage max.: DC 31,2V, Output current per channel: 0.5A, Field supply voltage: DC 24 V (-25...+30 %), via power jumper contacts
The 753-1630 SMI Master Module is a standard interface to SMI-compliant electrical drives.
The SMI master operates up to 16 SMI drives. Several SMI masters may be operated within a node.
The module supports the SMI specification (Rev 1.0) functionality.
Communication between applications and SMI drives is performed via special IEC function blocks. These function blocks support both single and group addressing, as well as status monitoring.
The SMI function blocks can be used with the 750 Series Programmable Fieldbus Controllers.
Alternatively, an Easy Mode allows functions to be easily controlled without any complicated PLC programming.
The SMI configurator is suitable for addressing, configuring and commissioning SMI drives.
The programmed commands can be overwritten by an external sensor or switch via additional digital input. The drive can be switched off by a relay via additional digital output to save energy. The drive is automatically switched on again by the output before the next drive command.
SMI stands for Standard Motor Interface, a standard interface for electrical drives. SMI was developed to connect drives with integrated electronic circuitry for applications in shutters and sunshade systems. SMI is a protected word/image mark of the SMI Standard Motor Interface e.V. VR995 District Court Constance.
Isolation: 3 kVAC RMS, 4 kV surge (system/SMI); 1.5 kVAC RMS, 2.5 kV surge (system/field)
Wago Relay socket with Miniature switching Relay and status indicator, each 1-CO contact, DC 24V, max. continuous current: 16A, relay type: RT 1
Wago EPSITRON® COMPACT Power, Primary switch mode Power Supply, 1-phase, output voltage: DC 24V, 4A
Wago DALI Multi-Master DC/DC-Converter to supply the 753-647 DALI Multi-Master Module, output voltage: DC 18V (at +U and -U), voltage via Power jumper contacts max.: DC 24V, input voltage range: DC 18-31,2V