Wago 750-650/003-000 WAGO I/O-SYSTEM 750 Communication Module
Serial Interface RS-232C configurable, Bit skew <3%; RS-232C line length max.: 15 m, Type of signal: RS-232, Baud rate: 1,2 kBd..57,6 kBd (9,6 kBd default setting), Parity: None/Even, No. of Data Bits: 7/8, No. of Stop Bits: 1/2, Transmission channels: 1-TxD/1-RxD, full duplex, Bit width: 1x 24 Bit input/output (3 Byte User Data) 1x 8 Bit control/status, Buffer: 120-Byte Input/16-Byte Out
The interface integrated in the I/O module allows the connection of any device which is equipped with an RS-232 C interface.
The interface operates in accordance with the TIA/EIA-F, CCITT V.28/DIN 66259-1 standard.
The connected device can communicate directly with the control unit via the fieldbus coupler.
The active communication channel works independently of the higher-level fieldbus system and allows full duplex operation up to 19200 baud.
The RS-232 C interface guarantees high interference immunity because of the electrically isolated signals.
The shield (screen) is directly connected to the DIN rail.
Internal bit width:
1x 24-bit input/output (3-byte user data)
1x 8-bit control/status
Wago Interface resistance module RB57 for SMI-Drives AC 230V Voltage supply DC 24V, no. of SMI-channels: 1, no. of Drives per channel: 16, operational indication: LED green, interface: RS-232 (Interface-input)