Wago 750-585 WAGO I/O-SYSTEM 750 Intrinsically safe Analog Output Module
2-Channel Analog-Output, Signal: DC 0-20 mA, Intrinsically safe, Actuator connection: 2x (2-conductor), Resolution: 12 Bit, Conversion time: 2 ms, Power consumption Pmax.: 1,5 W, measuring error: 0.2%, temperature error-max.: 0.01%/K, Intrinsically safety Ex i: yes, Linearity: +-2 LSB
The analog output module transmits intrinsically safe 0-20 mA signals in the hazardous areas of Zone 0+1.
The WAGO-I/O-SYSTEM 750 must be installed either in Zone 2 or in a non-hazardous area.
Power is derived from the power jumper contacts.
The outputs are short-circuit-protected.
LED: Green LED (output status)
Field and system levels are electrically isolated.
Note: The analog output module must only be operated via Ex i 24VDC power supply!
General information (e.g., installation regulations) on explosion protection is available in the WAGO-I/O-SYSTEM 750 manuals!
24 VDC (provided via Ex i supply UO = max. 27.3 V)
EN 60079-0, EN 60079-11, EN 60079-15, EN 60079-26, EN 60079-31
II 3 (2) GD Ex nA tD [ib] [ibD] I/IIC / IIB A22 IP6X T135°C (T4)
Uo = 27.3 V , Io = 57.5 mA, Po = 392 mW, Characteristic: Linear