Wago 750-563 WAGO I/O-SYSTEM 750 Analog Output Module
2-Channel Analog-Output, Signal: DC 0-20 mA / 4-20 mA / DC 6-18 V, Type of signal configurable, Actuator connection: 2x (2-conductor, 4-conductor), Resolution: 16 Bit, Conversion time: 5 ms, measuring error: 0.05%, Temperature coefficient: <+-100 ppm, Recovery time typ.: 0.3 ms
The analog output module generates output currents ranging from 0/4 to 20mA or output voltages in the range from 6 to 18V for the field.
Output ranges can be configured via WAGO-I/O-CHECK or GSD files.
The module has two short circuit-proof output channels and enables direct connection of two 2-line actuators on the connections AO 1 and ground or AO2 and ground.
Signals are output via AO 1 or AO 2.
In addition, the sense lines from 4-line actuators can be connected to the connections Sense AO1 and +Sense AO1 or Sense AO2 and +SenseAO2.
Both output channels have a common ground potential.
The output signal is electrically isolated and transmitted with a resolution of 16 bits.
Both the internal system and the field side supply power the module.