Wago 750-562 WAGO I/O-SYSTEM 750 Analog Output Module
2-Channel Analog-Output, Signal: DC 0-10 V / +-10 V, Type of signal configurable, Actuator connection: 2x (2-conductor, 4-conductor), Resolution: 16 Bit, Conversion time: 5 ms, measuring error: 0.05%, Temperature coefficient: <+-100 ppm, Recovery time typ.: 0.3 ms
The analog output module generates output voltages ranging from 0-10V or ±10V for the field.
Output ranges can be configured via WAGO-I/O-CHECK or GSD files.
The module has two short circuit-proof output channels and enables direct connection of two 2-line actuators on the connections AO 1 and ground or AO2 and ground.
Signals are output via AO 1 or AO 2.
In addition, the sense lines from 4-line actuators can be connected to the connections Sense AO1 and +Sense AO1 or Sense AO2 and +SenseAO2.
Both output channels have a common ground potential.
The output signal is electrically isolated and transmitted with a resolution of 16 bits.
The internal system supply powers the module.
The field power supply is only forwarded to the downstream I/O modules.