DP/CAN-Koppler CANopenŽ Layer 2, PROFIBUS-Inferface: No. of: 1; protocol: PROFIBUS-DP; max. 12 Mbit/s; E/A-image: max. 240 Bytes input-/240 Bytes output-data; SUB-D-socket 9-pole; CAN-Inferface: No. of: 1; type: ISO/DIN 11898-2 CAN High Speed physical Layer; 10 Kbit/s-1 Mbit/s; protocol: CANopenŽ Master CAN 2.0A (11 Bit); connection: terminal 3-pole; TPDOs: 4; RPDOs: 4
The DP/CAN coupler integrates CANopenŽ devices into a PROFIBUS DP network.
On the PROFIBUS-DP, the DP/CAN coupler is a normal participant.
The I/O data of the CANopenŽ participants is shown in the PROFIBUS in a transparent and freely configurable manner.
The DP/CAN coupler is integrated in the hardware configurator with a GSD file and can be completely configured there.
Additional tools are not necessary.
On PROFIBUS, all standard transfer rates up to 12 Mbps are supported; on the CAN bus up to 1 Mbps.
The PROFIBUS address is set using a DIP switch.
Parameterization of the CANopen participants using SDO frames and administration of emergency messages is also possible.
Alternatively, the DP/CAN coupler can also be used as a CAN Layer 2 device on the CAN bus.
This makes it possible to also integrate customer-specific CAN protocols via PROFIBUS.