Beckhoff CX1010-N041 Embedded PC System interface
Interface module 2x RS422/RS485 optically isolated (COM3/COM4), can only be used instead of and not at the same time as CX1010-N040, full 115kbaud on both channels, electrically isolated interfaces (optically isolated), modes: RS485: with/without echo, with/without termination, RS422: full duplex, pre-assembled in the factory, cannot be upgraded
A number of optional interface modules are available for the basic CX1010 CPU module that can be installed ex factory.
The CX1010-N010 option connects Beckhoff Control Panels or standard monitors with DVI or VGA input via the DVI or USB interfaces.
Devices such as printer, scanner, mouse, keyboard, mass storage, etc. can be connected via the USB 2.0 interfaces.
Multimedia capability is realised via the CX1010-N020 audio interface.
The modules CX1010-N030 and CX1010-N040 offer a total of four serial RS232 interfaces with a maximum transfer speed of 115 kbaud.
These four interfaces can be implemented in pairs as RS422/RS485, in which case they are identified as CX1010-N031 and CX1010-N041 respectively.
The system interfaces cannot be retrofitted or expanded in the field.
They are supplied ex factory in the specified configuration and cannot be separated from the CPU module.
The internal PC/104 bus runs through the system interfaces, so that further CX components can be connected. The power supply of the system interface modules is ensured via the internal PC/104 bus.