Wago 750-611 WAGO I/O-SYSTEM 750 Supply and segment modules
Power Supply Module AC 230V with Fuse holder with Diagnostics, Fuse: 5x 20 T 6,3A not included, Bit width: 2 Bit (1 Bit Voltage monitoring, 1 Bit, Fuse: defective), Current consumption System.: (5 V) 5 mA, Field supply voltage: AC 230 V via Power Jumper contacts, Power supply via CAGE CLAMP/Transmission via spring contact, Power Jumper contacts Output: 3, max. Current Jumper contacts: 6.3 A
The supply module provides the I/O modules with the corresponding supply potential.
The maximum current at the supply module is 6.3A.
When configuring the system, it must be ensured that this total current is not exceeded.
Should higher currents be necessary, intermediate supply modules must be added in the assembly.
This module is fuse-protected (5 x 20mm).
The fuse can be changed quickly, with ease, from the retractable fuse carrier.
A blown fuse and the status of the supply voltage are indicated via LEDs.
The I/O module sends information about the status of the supply module to the fieldbus coupler through two input bits.
One bit is for the status of the fuse. The other bit is for the status of the supply voltage.
5 x 20, T 6.3 A (Fuse not included. Use UL recognized fuses only!)