Wago 750-352 WAGO-I/O-SYSTEM 750 Fieldbus Coupler
Fieldbus Coupler 3. Generation ETHERNET, Baud rate: 10/100 Mbit/s, Buscoupler connection: 2x RJ-45, no. of I/O modules: 64 with bus extension 250, input process image max.: 1020 Byte, output process image max.: 1020 Byte
The 750-352 ETHERNET Fieldbus Coupler connects ETHERNET to the modular WAGO-I/O-SYSTEM.
The fieldbus coupler automatically configures, creating a local process image which may include analog, digital or specialty modules. Analog and specialty module data is sent via words and/or bytes, digital data is sent bit by bit.
Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired in a line topology.
This eliminates additional network devices such as switches or hubs. Both interfaces support Auto-Negotiation and Auto-MDI(X).
The DIP switch configures the last byte of the IP address and may be used for IP address assignment (DHCP, BootP, static).
The coupler is designed for fieldbus communication in both Ethernet/IP and MODBUS networks. It also supports a wide variety of standard ETHERNET protocols (e.g., HTTP, BootP, DHCP, DNS, SNMP, FTP).
An integrated Web server provides configuration and status information to the coupler.
The coupler has an integrated supply terminal for the system voltage.
The field power jumper contacts are supplied via a separate supply module.
Wago 16-channel Digital Input, DC 24V, 3 ms, high-side switching, 1-wire connection, with Power jumper contacts
Wago 16-channel Digital Output, DC 24V, 0,5A, high-side switching, with Power jumper contacts, short-circuit-proof
Wago 4-channel Digital Input, DC 24V, 3 ms, high-side switching, 2-wire connection, with Power jumper contacts
Wago 2-channel Digital Output, DC 24V, 2,0A, high-side switching, with Power jumper contacts, short-circuit-proof
Wago 4-channel Digital Output, DC 24V, 0,5A, high-side switching, with Power jumper contacts, short-circuit-proof, 2-wire connection