Wago 750-348 WAGO-I/O-SYSTEM 750 Fieldbus Coupler
Fieldbus Coupler CANopen, D-Sub, ECO, Baud rate: 10 kbaud-1 Mbaud, Buscoupler connection: 1x D-Sub 9 plug, no. of I/O modules: 64, input process image max.: 32 Byte, output process image max.: 32 Byte, no. of PDO: 5 Tx/5 Rx, no. of SDO: 1 Server SDO, no. of couplers connected to Master: 110
The ECO fieldbus coupler is designed for applications with a reduced scale I/O requirement.
Using digital only process data or small amounts of analogs, while retaining all of the choice that’s offered by the Series 750 I/O.
The coupler has an integrated supply terminal for the system voltage.
The field power jumper contacts are supplied via a separate supply module.
The CANopen bus coupler is capable of supporting all I/O modules and automatically configures, creating a local process image.
The local process image is divided into two data zones containing the data received and the data to be sent.
The process data can be sent via the CANopen fieldbus to the PLC, PC or NC for further processing, and received from the field via CANopen.
The data of the analog modules is stored in the PDOs according to the order in which the modules are connected to the buscoupler.
The bits of the digital modules are sent byte by byte and also mapped in the PDOs.
If the amount of digital information exceeds 8 bits, the buscoupler automatically starts with a new byte.
All entries of the object dictionary can be mapped, as the user likes, in the 5 Rx PDOs and 5 Tx PDOs.
The complete input and output process image can be transmitted using SDOs.
Spacer modules can be set via software.
Notice: EDS files required
Wago Relay socket with Miniature switching Relay and status indicator, each 2-CO contact, DC 24V, max. continuous current: 2x 8A, relay type: RT 2